HDPE Electrofusion Tapping Saddle

HDPE Electrofusion Fittings, HDPE Electrofusion Tapping Saddle, hdpe tapping saddle, electrofusion tapping saddle, hdpe electrofusion tapping saddle, tapping tee hdpe, hdpe tapping tee, hdpe saddle tee, electrofusion saddle fitting, electrofusion tapping tee,ef tapping saddle

HDPE Electrofusion Tapping Saddle is used to tap into a HDPE pipeline. Manufactured and tested in our world-class facilities, a range of electrofusion tapping saddles offering a solution for bypass, purging and off-takes.

HDPE Electrofusion tapping Saddle fittings may also be known as an electrofusion tapping tee or EF tapping saddle. It has implanted metal coils placed around inner surface, and the other branch outlet are long spigot type, which requires a coupler to join it to another pipe or fittings. The electrofusion tapping tee is assembled with metal cutter inside, and when the electrofusion welding is finished, the installer worker can use a special tool to screw down the metal cutter to tap a hole on the pipeline, and then screw up the metal cutter to seal off the access, so the water can go into the branch outlet.

Electrofusion Tapping tee, or saddles, are less common but operate under the same principles as a coupler. They require clamping to ensure a proper fit up with the pipes.

Made by 100% PE100 material, SUNPLAST HDPE electrofusion tapping saddle can can be supplied in a diameter sizing from 63×25mm~315×90mm in SDR11-PN16.

The electrofusion saddle fittings are injection molded in one time, and conform to ISO4427-3,EN12201-3, AS/NZS 4129, EN1555, EN ISO15494 standard (ISO4437-3 for gas)

SUNPLAST keeps mass stock in demand for regular sizes, and customers’ urgent demand & prompt shipment request can be satisfied.

More brief details as below:

Product Specifications

HDPE Electrofusion Reducing Tee: available from DN63×25mm~315×90mmmm

Pressure: SDR11-PN16

Material: 100% virgin PE100 material

Color: black color or blue color.

(Noted: the technical data is just for reference, some data may change, if you need exact data, then please contact us directly)

Quality Certificate

SUNPLAST HDPE Electrofusion fittings system is specifically designed for reliable, high performance jointing and long service life for polyethylene piping systems.

The automated jointing system have been proven to be the most cost efficient and economical as it eleminates potential human-error during installation. The SUNPLAST Electrofusion Fittings comply to ISO4427-3/EN12201-3 standard, as well EN1555 standards, and are rated in PN10 & PN16. The Fittings are manufactured using PE100 Materials and comes in sizes ranging from 20mm to 630mm and boast the minimum life span of 50 Years.

SUNPLAST HDPE Electrofusion Fittings are Approved by by ISO4427 certificate, CE certificate for EN12201.,etc

Manufacturing Facilities

SUNPLAST is a ISO9001 certificated manufacturing factory. As a premier manufacturer of HDPE electrofusion fittings, the factory owns mature technology, advanced production machine, professional workers & completed QC system. All electrofusion fittings are manufactured strictly in compliance with national standards and international standards.

Till now, there is over 30 sets of injection machines in SUNPLAST workshop, available to manufacture HDPE fittings till 800mm, and annual production capacity reaches 6,000 tons.

Why Choose Us?

☑ Rich experience on manufacturing HDPE fittings over 20 years, we are an expert in this industry.

☑ Full product range available, you will always find the right solution here.

☑ Strong after-sale term supports to provide professional guide for installation.

☑ By using top quality raw material, with long warranty time on quality.

☑ Short lead time to satisfy your urgent need request.

☑ Quick reply for your inquiries within 12 hours.

☑ OEM service available to support a good sale in customers' market.

FAQS

* HDPE butt fusion fittings & HDPE electrofusion fittings, which one is better?

A: HDPE butt fusion fittings & HDPE electrofusion fittings, both are the most common used HDPE pipe fittings.

* Material Costs

The HDPE butt fusion fittings are regular much cheaper prices than HDPE electrofusion fittings. The HDPE pipes adopt butt fusion methods, no special coupler fittings needed , so less fittings will be requested, and much lower on material costs.

* Installation Costs

The HDPE electrofusion fittings can be welded in much simpler way, which can be used for the certain circumstances where butt fusion is not practicable. Less installation costs & labor costs for electrofusion, as well as electrofusion machine is much lower on prices.

* Reliability of Jointing

HDPE electrofusion fittings has a more reliable jointing than HDPE butt fusion fittings. The HDPE electrofusion fittings can weld in secondary times when a leak happens.

So, it is difficult to distinguish which one is better, because both of them reputes excellent performances. The HDPE electrofusion fittings can save installation costs and provider a more reliable jointing while HDPE butt fusion fittings are much lower on material costs.

Finally, it depends on the project size and type, and location of installation. Electrofusion fittings can be a better choice for smaller, tighter spaces where onsite welding is being used.

* What’s the typical reasons that make the electrofusion welding fail?

A: The majority of fittings that leak do so because of incorrect installation. The three main causes of joint failure when using electrofusion fittings are:

• Poor joint preparation

• Contamination of the joint caused during the jointing process

• Misalignment of the pipe within the fitting.

So, to achieve the success of electrofusion welding, a well trained installer strictly follow the guide is very important.

* Can SUNPLAST HDPE electrofusion fittings weld to the HDPE pipe from the other manufacturer?

A: Yes, as long as as the HDPE pipe is standard size as per ISO4427, and be made of virgin HDPE material.

Contact Us

If you have any requirements on HDPE Electrofusion fittings, or any question on our fittings, please contact us freely. SUNPLAST has well trained staff who are available to address your needs and provide technical support to all sectors when needed.

Hot Tags: HDPE electrofusion tapping saddle, China, suppliers, manufacturers, factory, buy, price, made in China, ef fittings, electrofusion saddle fitting, Electrofusion Bend, hdpe tapping tee, hdpe service saddle, coupler hdpe