Due to the fierce competition in the market and the rapid development of modern technology, providing high-quality HDPE Clamp Saddle, hdpe cross tee, uPVC Bell End Fittings and services has become an important means for enterprises to participate in the competition. We always adhere to the production mode of safety, energy saving, environmental protection and high efficiency, and our products have passed several quality system certifications. Our colleagues get along with each other is, less criticism and blame, more encouragement and counseling, diligent communication and concern. We will meet customer needs with high-quality products and excellent services to achieve better economic benefits. We continue to improve product quality competitiveness, speed up the development of enterprises, to provide new and old customers with quality products and satisfactory service.

uPVC Pipe Fittings, uPVC Gasketed Fittings, uPVC Fittings With Rubber Ring joint, uPVC Faucet Fittings, uPVC Faucet Reducer, uPVC Gasketed Reducer, uPVC Reducer with rubber ring, uPVC Faucet Reducing Coupler, uPVC Faucet Reducer Fittings, PVC Faucet Reducer

Sunplast uPVC rubber gasket fittings are manufactured in accordance with ISO 4422-3:1996.

U-PVC fittings with rubber ring joint for transporting water in high-quality plastic material.

These special fittings are equipped with a gasket in atoxic NBR, the G/RRJ, utilized rubber seal to create watertight joint, suitable to use for water supply reticulation systems.

Material

- PVC-U = Unplasticised Polyvinylchloride

Gaskets

- EPDM

Manufacture

- Injection moulded

SUNPLAST uPVC rubber ring fittings are exclusively available in full range of nominal metric diameters from 20mm to 400mm, with a normal working pressure of PN10 bars, and are manufactured and tested in accordance with the domestic standard GB/T10002.2-2003, at the same time, they can also comply to international standards of ISO 4422-3:1996; ISO 1542-3:2009.

About uPVC Faucet Reducer Fittings

uPVC faucet reducer, also called uPVC gasketed reducer, has a rubber ring placed in two bell ends. uPVC faucet reducer with rubber ring is commonly used for the connection of two different diameter of uPVC pipelines with spigot ends.

More brief details as below:

Product Specifications

SUNPLAST uPVC faucet reducer fittings can be provided in a diameter from 75*63 to 355*315mm, with a normal pressure rating of PN10 bars:

(Noted: the technical data is just for reference, some data may change, if you need exact data, then please contact us directly)

Our Product Range

As a integrated manufacturer who engaged in uPVC pipe fittings over 10 years, SUNPLAST has developed a wide range of uPVC products with excellence performance & durability, all customers can find the best solution of fittings for their uPVC pipeline systems in SUNPLAST.

Now, SUNPLAST uPVC fittings with rubber ring joint can be supplied in a diameter ranging from 20mm to 400mm in PN10, which are comprised of the regular types: uPVC faucet flange adaptor, uPVC faucet tee, uPVC faucet 90 degree elbow, uPVC faucet 45 degree elbow, uPVC faucet 22.5 degree elbow, uPVC flanged tee.,etc.

Technical Parameter

The uPVC pipe fittings are manufactured into GB/T10002.2-2003, as well as ISO 4422-3:1996, ISO 1542-3:2009 standard.

FAQS

* What’s the main difference between uPVC pipe fittings & PVC pipe fittings?

A: There is only one difference between PVC and uPVC and that is that PVC contains BPA and phthalates, which are two plasticizers that make it more flexible. The "u" in uPVC stands for "unplasticized," and because it doesn't have these extra materials, uPVC is often called rigid plastic.

Because of its rigidity, uPVC is a better construction material than PVC. The plasticizing materials in PVC toxic, although it is very low, so PVC pipes & fittings are undesirable for transporting residential water for drinking. uPVC pipes & fittings don’t include any toxic plasticizers, so they are suitable for drinking water transportation.

* What’s the max. Working pressure of uPVC gasketed fittings? How about the max. Working temperature?

A: SUNPLAST uPVC gasketed fittings are designed and manufactured to GB/T10002.2-2003, ISO 4422-3:1996, ISO 1542-3:2009 standards and rated for a maximum internal pressure of PN10 bars at 20℃.

The uPVC pipe fittings are suitable for COLD water only, the maximum recommended operating temperature is 60℃.

* Are uPVC pipe fittings UV-resistant?

A: uPVC is an extremely versatile product that has uses ranging from drinking water to highly corrosive chemical applications. The product contains UV stabilising additives and thermal properties which ensure that it is suitable for both interior and exterior environments.

* For the buried PVC waster pipe, should I use solvent weld joint fittings? Or rubber ring gasket fittings?

A: Typically, uPVC rubber ring fittings are used for larger diameter pipes (4 inch and larger) where the runs consist of longer distances with a low density of fittings. Examples would be outside of the building civil work and inside (below grade) storm drainage.

When you have smaller diameter pipes and a high density of fittings, such as a bathroom group, uPVC solvent joint fittings would be used.

Contact Us

If you have any requirements on uPVC fittings, or any question on our fittings, please contact us freely. SUNPLAST has well trained staff who are available to address your needs and provide technical support to all sectors when needed.

Our mature and perfect quality management system has laid a good foundation for systematic assurance of the China Supplier Female Reducer (C09) and services. In such circumstances, our company insists on technology of automation, good quality and favorable price. We have clear strategic goals, strong economic strength, advanced concepts, and novel service models.

Hot Tags: UPVC faucet reducer, China, suppliers, manufacturers, factory, buy, price, made in China, elbow HDPE 45, hdpe elbow, PVC Solvent Weld Fittings, uPVC Bend 45, electric fusion coupling, uPVC Cross