Our PP Compression Male Tee, tapping tee hdpe, uPVC Solvent Female Adaptor attracts and gathers more and more high-quality customers, excellent employees, and high-quality suppliers to create brilliance. We will uphold the principle of harmonious development of society, nature and resources, and seek the common development of enterprises and society. Our company regards quality as life and regards the actual interests of customers and its own long-term development as one. We believe that through our sustained efforts and friendly cooperation, both parties will have a better future.

HDPE Compression Fittings, PP compression fittings, HDPE Compression Female Elbow, Compression Female Elbow, HDPE female Elbow, Poly Female Elbow, PP Compression Female Elbow, HDPE pipe Female Elbow

A HDPE compression female Thread elbow fitting is used to join two lengths of metric HDPE pipe in an L shape at 90 degree angle, but with a threaded female fitting at one end.

HDPE female Elbow compression can be manufactured in a diameter sizing from 20*1/2mm to 110*4”mm, with pressures up to 16 bar. The PP compression female thread Elbow fittings are made from high quality PP-B material that is resistant to etching by numerous chemical substances, and to UV rays, and are suitable for outdoor use.

SUNPLAST Compression Fittings are supplied pre-assembled and ready to install. The range features joiners, reducers, elbows, tees and end fittings plus specialty fittings for recycled water. HDPE to copper and a range of different pipe types use the Universal Transition Coupler (UTC) allowing connection from other rigid piping systems.

PP compression female Elbow fittings are consisted of 5 plastic accessories:

More brief details as below:

Product Specifications

HDPE/PP compression female Elbow fittings can be manufactured sizing from 20*1/2” mm to 110*4”mm. The size 20-63mm with a pressure of PN16, and 75-110mm pressurized in PN10. 

Applicants of HDPE Compression fittings

The range of poly pipe compression fittings are for use with high density polyethylene pipes dedicated to fluid reticulation. They can be used in irrigation, drinking water systems, valves and high pressure lines for water, gas and other fluids, and many items suitable for a very wide range of plant engineering installation requirements.

• Watering: Residential, municipal, sport fields, golf courses.

• Irrigation: Agriculture, horticulture, vineyards.

• Industry: Compressed air.

Why Choose Us?

☑ Rich experience on manufacturing HDPE fittings over 20 years, we are an expert in this industry.

☑ Full product range available, you will always find the right solution here.

☑ Strong after-sale term supports to provide professional guide for installation.

☑ By using top quality raw material, with long warranty time on quality.

☑ Short lead time to satisfy your urgent need request.

☑ Quick reply for your inquiries within 12 hours.

☑ OEM service available to support a good sale in customers' market.

FAQS

* How to connect the PP compression fittings?

A: PP compression fittings are very easy to install, which involves the following steps:

● Preparing the pipe, removing the burrs and beveling the edge of pipe. The outer surface of the pipe must be free from imperfections or indentations where the body of the fittings make contact with the pipe

● Unscrewing the blue nut and put it into the pipe followed by the white clamping ring. Make sure the clamping ring is in the correct position, with the larger mouth outwards to the edge of pipe.

● Pressing the pipe axially into the poly compression fittings, until it touch the internal gap of fittings.

● Tightening the ring nuts by hand, and then use the torque wrench provided, till it is tight.

* What is the most common cause of leaking of HDPE compression fittings?

A: It is critical to avoid over-tightening the nut or else the integrity of the poly compression fitting will be compromised by the excessive force. If the nut is overtightened the ferrule will deform improperly causing the joint to fail. Indeed, overtightening is the most common cause of leaks in PP compression fittings.

* How much burst pressure can Poly compression fitting take?

A: SUNPLAST PP compression fittings are designed for the max.normal pressure 16 bars at 20℃, and the burst pressure reaches 35 bars.

* Can SUNPLAST HDPE compression fittings exposed under sunshine?

A: Yes, all HDPE pipe compression fittings are UV-resistant, and can be used outdoor.

* HDPE fusion fittings & HDPE compression fittings, which one is better?

A: It is hard to say. HDPE compression fittings are only be possible for small diameter pipe till 110mm, while HDPE fusion fittings are available for all sizes.

By comparison to HDPE fusion fittings, Poly pipe compression fittings are easy install, less cost, and are especially useful in installations that may require occasional disassembly or partial removal for maintenance etc., since these joints can be broken and remade without affecting the integrity of the joint.

The disadvantage is PP compression fittings are not as robust as fusion fittings.

Contact Us

If you have any requirements on PP compression fittings, or any question on our fittings, please contact us freely. SUNPLAST has well trained staff who are available to address your needs and provide technical support to all sectors when needed.

We encourage our employees to give full play to their creativity and potential by striving to build the best team in the PP Compression Fittings 90 Degree Lateral Threaded Female Elbow industry. We continue to improve the corporate governance structure, promote the diversification of the company's equity structure, and ensure the sustainable development of our company. Innovation of technology and quality is the theme of the company' s development.

Hot Tags: HDPE compression female thread elbow, China, suppliers, manufacturers, factory, buy, price, made in China, HDPE Electrofusion Equal Tee, PVC Faucet Flange, electrofusion gas fittings, Poly Pipe male Elbow, electrofusion coupler, hdpe flange adapter with backup ring