Two Shortcuts For Connecting Mute Pipes And Pipe Fittings

This time I teach you two shortcuts for connecting mute pipes and fittings, one is the national standard socket connection, the other is the screw connection, the following are the installation points:

(1) Socket type frpp mute pipe installation, main points

When installing the pipe, a special cutter must be used for cutting, and the section is perpendicular to the axis. It is recommended that the distance between the two socket-type flexible connections should not exceed 3m. The length adjustment can be compensated by the depth of the socket. However, the length of the pipe after being inserted into the bottom of the pipe fitting should not exceed 8mm in summer and 12mm in winter.

(2) Installation and main points of frPP mute pipe with socket and screw compression

1. Use a dedicated pipe cutting machine (cutting machine or cutter) to cut the pipe, and the end of the pipe should be perpendicular to the pipe axis.

2.Sleeve the thread ring, the clamp ring, and the sealing ring on the connected pipe in sequence.

3. Insert the head of the pipe into the groove on the inner end of the connecting body (you can apply lubricant evenly on the head of the pipe).

4. Push the pipe to 4mm from the bottom of the inner groove of the pipe, and start to tighten the threaded ring to achieve the purpose of sealing connection.

I found that there is no Yitong Mute Pipe Small Class to explain to everyone is very concise and clear, is it very intimate, if you like the knowledge content of the quiet tube compiled by the Yi Mute Pipe Small Class, please pay attention to us.